Support for different question types
Exam configuration option provided
Exam configuration option provided
Flash card information available
Score graph report after end of each exam
Detailed help file included
Router and Switch Simulator
100+ Labs included for practice
Support for 200+ Router and Switch commands
Detailed Lab Manual provided
Supports short-form commands
Router Simulator supporting several routers commands
Lab Exrecises for hands-on practice
Detailed Lab Manual provided
Simulate J-Series and M-series juniper routers
Designer supporting J2320/J2350/J4350/J6350 and M7i/M10i routers
Router and Switch simulator
Router and Switch simulator
Lab Exrecises for hands-on practice
Support for 200+ Router and Switch commands
Simulate Cisco IOS Routers 2500/2600/3600 and Switches 2950/2960
Detailed Lab Manual provided
Router and Switch simulator
Lab Exercises for hands-on practice
Support for 200+ Router and Switch commands
Simulate Cisco IOS Routers 2500/2600/3600 and Switches 2950/2960
Detailed Lab Manual provided
Lab Simulator for CompTIA® Network+™ and A+™ provides hands-on experience for candidates intending to prepare for Network+™,A+™ certification. The software comes with several ready made labs so that users can get acquainted with the simulator and its functionalities.
The Network+™ LabSim offers advanced AP/rRuter/Sswitch network simulator functionalities including VLANs, VTP, interVLAn communications. The important features of the LabSim are given below:
Lab exercises -currently 50+ labs are included with scenario type labs for NAT, OSPF, EIGRP, Access Lists, and others.
Workstation, Server, Access Point, Router and Switch (IOS) network simulator.
Configure Wireless Access Point, DHCP Server, and Switches.
Network designer provides drag and drop feature for inserting devices and connectors. GUI based device configuration.
Connectors available are Serial, Ethernet, IsdnBri, Frame Relay, Fast Ethernet
Sample Lab Exercises:
Configuring IP address, subnet mask, default gateway statically on a Windows client
Configuring DNS server IP addresses statically on a Windows client (WS1).
Configuring a Windows client work station to obtain DHCP parameters from a DHCP server
Configuring a DHCP server for offering DHCP parameters to a DHCP client computer
View all the Network+ lab exercises
Some of the main features of A+™ Lab Simulator:
Lab exercises -currently 50+ labs are included.
The demo version is limited to a fewer labs, and upto global configuration mode is supported in demo version.
Detailed Lab Manual provided.
Detailed help files that provide step by step instructions on using the simulator have been provided.
View sample lab exercises:
Disclaimer: CertExams.com is neither associated nor affiliated with CompTIA® or any other company. A+™, Network+™ are trademarks of CompTIA® organization and duly acknowledged. The Cram Notes and practice tests material is a copyright of CertExams.com and the same is not approved or endorsed by respective certifying bodies.
