Practice Questions for CCNP Switch

Previous   Next

Q7. What is the command used to select the voice VLAN mode to be used on an IP phone connected to a switch port?

switch(config-if)# switch voice vlan {vlan-id | dot1p | untagged | none}

switch(config-if)# voice vlan {vlan-id | dot1p | untagged | none}

switch(config-if)# switch port vlan {vlan-id | dot1p | untagged | none}

switch(config-if)# switchport voice vlan {vlan-id | dot1p | untagged | none}



Your Answer =


Answer / Explanation:

CertExams Blog!  Certexams.com Facebook Page Certexams.com Twitter Page Certexams on YouTube 


Cert-Ex™ Exam Simulators, Cert-Ex™ Network Simulator, Cert-Ex™ Cheatsheets are written independently by CertExams.com and not affiliated or authorized by respective certification providers. Cert-Ex™ is a trade mark of CertExams.com or entity representing Certexams.com.CCNP® is a trademark of Cisco™ systems.