Blog    Register    Login   

Practice Questions for CCNP ENARSI Cert

Previous   Next

Q8. A single-line access control list (ACL) has been added to a router configuration using the command 'ip access-list 1 permit 192.168.16.0 0.0.0.255'. The configuration also includes the access-class 1 in command in virtual terminal configuration mode. Which answer accurately describes how the router uses ACL 1?

Hosts in subnet 192.168.16.0/24 alone can telnet into the router.

Command-line interface (CLI) users cannot telnet from the router to hosts in subnet 192.168.16.0/24 alone.

Hosts in subnet 192.168.16.0/24 alone can log in but cannot reach enable mode of the router.

The router will only forward packets with source addresses in subnet 192.168.16.0/24



Your Answer =


Answer / Explanation:

Previous   Next

CertExams Blog!  Certexams.com Facebook Page Certexams.com Twitter Page Certexams on YouTube 


Cert-Ex™ Exam Simulators, Cert-Ex™ Network Simulator, Cert-Ex™ Cheatsheets are written independently by CertExams.com and not affiliated or authorized by respective certification providers. Cert-Ex™ is a trade mark of CertExams.com or entity representing Certexams.com.CCNP™ is a trademark of Cisco® systems