Scenario Lab 1

Description : This exercise demonstrates the concept of designing a Home Network with a Router, Access Point, and Wireless Work Stations. -I

Communicating to Internet
a.Wrong DHCP Scope
b.Wrong SSID on Access Point
c. DHCP Server not assigned with static IP address and subnet mask.

A network administration has configured various components of the network as below:

Server Configuration:
IP address: 192.168.1.2
Subnet mask: 255.255.255.192

DHCP Range on Server: 
Start IP: 192.168.1.65
Stop IP: 192.168.1.128
Subnet mask: 255.255.255.192
Default Gateway: 192.168.1.1

Router R1 configuration:
E0: 192.168.1.1
255.255.255.192
S0: 202.100.15.10
Subnet mask: 255.255.255.64

Access Point (AP1): 
SSID:CertExams
WEP:Cert1

Client Configurations:
All workstations have been configured to obtain the IP settings from DHCP server.

It was reported that none of the workstations are able to ping the Router R1ís E0 interface (Default Gateway). The technician had checked all the physical connections are found them to be in order.What is the most likely problem?

Note: Please refer to the CertExams.com Lab Simulator For Network+ software for complete lab with commands. 

Real Time Web Analytics

Clicky