Description: Set the vty password for lines 0 to 4. (Choose R1 from the network diagram and exit to simulator terminal)
Instructions:
1. Enter into global configuration mode
2. Configure a password ‘cisco’ that will enable remote users to Telnet into vty ports 0-4.
R1>enable
R1#configure terminal
R1(config)#line vty 0 4
R1(config-line)#password cisco
Cert-Ex™ Exam Simulators, Cert-Ex™ Network Simulator, Cert-Ex™ Cheatsheets are written independently by CertExams.com and not affiliated or authorized by respective certification providers. Cert-Ex™ is a trade mark of CertExams.com or entity representing Certexams.com.Network+™ is a trademark of CompTIA® organization.
