The labs are intended to provide some hands-on practice to beginners. It is encouraged that you write your own labs and practice after going through the labs provided here. Please note that we add and/modify the labs from time to time.
Labs
Networking Fundamentals and WorkStation (WS) Labs:
1.1 Networking Fundamental labs
Arranging the Cable Strands Used in the TIA/EIA 568A Wiring Standard in Order as Per Color Codes
Identifying the Network Troubleshooting Command, Given an Output
Matching the Fiber Cable Standards With Respective Maximum Transmission Distance
Identifying the Command Used for Querying inet_add, Given the Command Output
Identifying the NSlookup Command Queries Used for DNS Troubleshooting
1.2 Wired (Ethernet) WorkStation Configuration and Troubleshooting.
Configuring IP address, subnet mask, default gateway statically on a Windows client
Configuring DNS server IP addresses statically on a Windows client (WS1).
Configuring a Windows client work station to obtain DHCP parameters from a DHCP server
Configuring a DHCP server for offering DHCP parameters to a DHCP client computer
Troubleshooting subnet mask on a Windows client computer using ipconfig/all command
Troubleshooting simple network of two PCs connected through a Switch and check communication
Telnet to a DHCP server (given DHCP server IP address) and verify login.
1.3 Wireless Work Station Configuration
Access Point and DHCP Configuration Labs
Router Configuration and Troubleshooting Labs
Switch Configuration and Troubleshooting Labs
Scenario labs – Home and Small Office Networks
Any suggestions or feedback, please email:
updated(3-Aug-2018)