Home >Lab Simulator For Network+>Configure WEP on a Wireless Access Point.

Available LabsDownload Network+ Lab Sim

Configure WEP on a Wireless Access Point.

Description : Configure basic parameters of a wireless Access Point (AP1). Given below are the IP address, subnet mask, channel, and SSID.Also, configure WEP on AP1 with a password

IP Address: 192.168.1.3
Subnet mask: 255.255.255.0
SSID: CertExams
Channel: 11

Note: Please refer to the CertExams.com Lab Simulator For Network+ software for complete lab with commands. 

Real Time Web Analytics

Clicky