Home >Lab Simulator For Network+>Troubleshooting subnet mask on a Windows client computer using ipconfig/all command.

Available LabsDownload Network+ Lab Sim

Troubleshooting subnet mask on a Windows client computer using ipconfig/all command.

Description : The manually configured client WS1 is unable to communicate to any other clients or gateway on the network. Check whether the same are properly configured on WS1. 
WS1 Configuration:
IP address: 192.168.1.130
Subnet mask: 255.255.255.128
Default gateway: 192.168.1.1

Note: Please refer to the CertExams.com Lab Simulator For Network+ software for complete lab with commands. 

Real Time Web Analytics

Clicky