Home >Lab Simulator For Network+> Troubleshooting IP settings on WS1 by using ping command

Available LabsDownload Network+ Lab Sim

Troubleshooting IP settings on WS1 by using ping command

Description : Troubleshooting IP settings on WS1 by using ping command (Ping from WS1 to ISP router at 200.202.1.51 Verify whether the Gateway address is properly configured.)

For this purpose, assign an IP address 192.168.1.1 and subnet mask 255.255.255.0 for interface E0 on router R1. Similarly, assign and IP address of 200.202.1.51 and subnet mask of 255.255.255.0 on interface S0 on R1. Misconfigure Gateway on WS1 to 192.168.0.1

Note: Please refer to the CertExams.com Lab Simulator For Network+ software for complete lab with commands. 

Real Time Web Analytics

Clicky