Home >Lab Simulator For Network+>Troubleshooting DNS server configuration on a client computer using ipconfig/all command. 

Available LabsDownload Network+ Lab Sim

Troubleshooting DNS server configuration on a client computer using ipconfig/all command. 

Description : Scenario: WS1, which has been manually configured, is not able to ping R1 by using host name. However, ping to 192.168.1.1 by using IP address is successful. Verify that the problem exists and correct the same using appropriate diagnostic command in the command prompt. DNS server is located at IP address 192.168.1.2

Note: Please refer to the CertExams.com Lab Simulator For Network+ software for complete lab with commands. 

Real Time Web Analytics

Clicky