Cert-Ex™ Lab Simulator for Network+ : Practice Lab Exercises

Switch 2950: Setting Privileged Password

Description: Here you assign enable password, and secret password on a 2950 switch. Again, select the switch by going to the network diagram, and selecting appropriate device from the drop down box. You can also use short form commands.

Instructions:

1. Enter global configuration mode.

2. Set enable password to "epass"

3. Set enable secret password to "spass"

4. Exit global configuration mode.

2950>enable
2950#configure terminal
2950(config)#enable password epass
2950(config)#enable secret spass
2950(config)#end


CertExams Blog!  Certexams.com Facebook Page Certexams.com Twitter Page Certexams on YouTube 

Cert-Ex™ Exam Simulators, Cert-Ex™ Network Simulator, Cert-Ex™ Cheatsheets are written independently by CertExams.com and not affiliated or authorized by respective certification providers. Cert-Ex™ is a trade mark of CertExams.com or entity representing Certexams.com.Network+™ is a trademark of CompTIA® organization.