Home >Lab Simulator For Network+>Enable FastEthernet Interface on a 2950 Switch

Available LabsDownload Network+ Lab Sim

Enable FastEthernet Interface on a 2950 Switch

Description: Here you enter interface configuration mode on a 2950 switch and make the interface protocol up. Choose 2950 switch by going to the network diagram, and selecting appropriate device.

Instructions:

1. Enter global configuration mode.

2. Enter interface sub-configuration mode for Ethernet slot#0 and port#1.

3. Shutdown the interface.

4. Exit to privileged mode.

2950>enable
2950#configure terminal
2950(config)#interface fastethernet 0/1
2950(config-if)#no shutdown
2950(config-if)#end

Real Time Web Analytics

Clicky