Description: Set the line console password for line 0. Use password routercon. (Select R1 from the N/W diagram).
Instructions:
1. Enter into global Configuration mode
2. Enter into line console 0 mode
3. Set console password as routercon
R1>enable
R1#configure terminal
R1(config)#line console 0
R1(config-line)#password routercon
Cert-Ex™ Exam Simulators, Cert-Ex™ Network Simulator, Cert-Ex™ Cheatsheets are written independently by CertExams.com and not affiliated or authorized by respective certification providers. Cert-Ex™ is a trade mark of CertExams.com or entity representing Certexams.com.Network+™ is a trademark of CompTIA® organization.
