Connectivity tests with traceroute

Description:  Use the traceroute command to map the IP addresses that a packet travels through to get from one device to another.

 

IP Address Assignment Table

Device Interface IP Address/Mask
R1 E0
S0

192.168.10.2/24
192.168.20.1/24

R2 E0 192.168.10.1/24
R3 S0 192.168.20.2/24


Instructions:

1. Configure routers to the specification given above

2. Enable RIP routing across all three routers

3. From Router1, ping the directly connected routers and their interfaces which are Router2 ethernet0 and Router3 serial 0

4. You should be able to ping non-directly connected routers as RIP routing is enabled

5. Next , the traceroute command is entered which helps in determining the path of a packet to its destination

Note: Please refer to the CertExams.com Lab Simulator For Network+ software for complete lab with commands. 

Real Time Web Analytics

Clicky