Cert-Ex™ Lab Simulator for Network+ : Practice Lab Exercises

Basic Switch IP Configuration

Description: Configure hostname as 2950, and set the switch ip address to 172.16.1.10 subnet mask 255.255.255.0. Also, set the default-gateway to 172.16.1.2

Instructions:

1. Enter user Exec mode.

2. Enter privileged Exec mode.

3. Assign the hostname “1900”.

4. Assign an ip address 172.16.1.10 255.255.255.0.

5. Assign default gateway route 172.16.1.2.

6. Exit switch configuration mode.

SW1>enable
SW1#configure terminal
SW1(config)#hostname 2950
2950(config)#ip address 172.16.1.10 255.255.255.0
2950(config)#ip default-gateway 172.16.1.2
2950(config)#end


CertExams Blog!  Certexams.com Facebook Page Certexams.com Twitter Page Certexams on YouTube 

Cert-Ex™ Exam Simulators, Cert-Ex™ Network Simulator, Cert-Ex™ Cheatsheets are written independently by CertExams.com and not affiliated or authorized by respective certification providers. Cert-Ex™ is a trade mark of CertExams.com or entity representing Certexams.com.Network+™ is a trademark of CompTIA® organization.